Vizualogic 2004 Manual de usuario descargar pdf (Pagina 6)

Care and Maintenance

Your Vizualogic

System is a product of superior design and craftsmanship

and should be treated with care. The suggestions below will help to fulfill any

warranty obligations and provide many years of enjoyment.

• Cleaning the Monitor Screen and Housing: The components may be cleaned

by occasional gentle wiping with a soft, lint-free, cotton cloth that has been

slightly dampened with water.

CAUTION: Do not use liquids, abrasives, aerosol cleaners, or paper

cleaning products because they will result in permanent damage to the

finish of your components! The LCD screen is made of a specially coated

glass and can be scratched or damaged by abrasive or ammonia-based

window cleaners.

• Use and Storage:

- These units contain precision electronics that must be protected from dust,

dirt, and moisture.

- Never spill liquids on any of the components. Liquids, humidity, and

precipitation contain minerals that will corrode electronic circuits.

• Take care to avoid the following:

- Rough handling can break internal circuit boards. Do not drop, knock, or

shake the components.

- Do not attempt to paint or refinish the components. Paint can clog moving

parts and prevent proper operation.

- The components can be damaged by non-expert handling. Attempting to

open any of the components may void the limited warranty.

Troubleshooting

• No Display: (Screen is blank)

- Point remote control at screen and press “POWER” button.

- Verify 12V power is correctly supplied to Video Controller.

- Verify that monitor cable is connected to Video Controller.

- Verify that 12V circuit is on (i.e., ignition position).

• No Video: (Blue screen)

- Make sure all video cables are connected correctly.

- Make sure Source (DVD player, etc…) is “ON.”

- Make sure Source (DVD player, etc…) is in “PLAY” mode.

- Press TV/AV button to ensure correct Input is selected.

1 2 3 4 5 6

Sin comentarios

Vizualogic 2004 Manual de usuario Pagina 6